Application of Lucky’s Molecular sieve
Molecular sieve is aluminosilicating crystal by hydrothermal compounding. We can sort all types of sieves such as A-type, X-type, Y-type because of different silica-alumina ratios. At the same time for the same type because of the different metal cations we can sort different kinds. Because it can separate different moleculars each other, so we call it as molecular sieve. The apertures of molecular sieve are the same size, so it is better than other dryers.
- Having very high deep dry separation degree
- Can effectively avoid adsorption together phenomenon, an increase the product rate.
- Can complete aridity with the material’s purification at the same time within the same system.
- Under higher temperature, have equal adsorption capacity.
- Compared with other aridity of system of sieves with separate to equip, equipments investment low,revolve the cost low.
Petrochemical Air Separating, Cryogenic Pressure Swing Adsorption Petroleum Chemical Medical supply with oxygen device Truck transport Natural gas Hollow glass
Use Molecular Sieve
Molecular sieve is a good sorbent of moisture, so it should be kept in dry place and avoid the exposition in the air. Before use, molecular sieve should be processed by regeneration because the molecular sieve may contains oil and liquid water, which will block the microcellular structure of molecular sieve. The oil in molecular sieve may be carbonized and produce carbon to block the holes of molecular sieve. When liquid water contacts with molecular sieve, it may releases a plenty of heat in very short time, which may happens dangerous accident or destroys the performance of molecular sieve. When molecular sieve in pressure container is regenerated, the pressure of tower should be lower down slowly, or it may causes the pulverization of molecular sieve. High temperature is good for the regeneration of molecular sieve, but it will cost a lot of energy and reduce the life of molecular sieve; therefore its regeneration temperature should be 200-350°C and do not exceed 600°C.
